View Single Post
Old 11-11-2012, 01:55 AM   #6275
Joined: Jan 2012
Location: Rodrigues, Mauritius
Oddometer: 13
I've completely dismantled my clutch; everything I could check with the service manual is in spec and my only remaining concern is the ~0.5 mm axial play in the mainshaft. Could this be normal? mention in the manual! Looking at the half washers, since they could decrease axial play when the clutch is assembled, I see they both appear to be crushed, or maybe it's just the normal finish, would greatly appreciate your views. They both measure 2.95 mm in thickness, does anyone know if this is in spec, as there is nothing noted in the service manual on this. Similarly, the stepped washer i measure is 5.1 mm in thickness, is this in spec? Cheers
Reshad is offline   Reply With Quote