Originally Posted by mass-klr
Just to make sure. If my SAE cable going to my battery has a fuse in line do I still need to leave the amps mount fuse on the part going from the mount to the SAE connector?
If your connection is fused then sure, snip the one off the Garmin cable but I left mine on since it makes it safer, in case I plug into someone else's bike sometime if I borrow a bike but don't know if their wiring is fused.
Better safe than sorry.
Besides, if I do blow the fuse, it's much more accessible this way.
I just remembered the other reason I left the fuse on the Garmin cable. The SAE cable has a larger fuse than is best to protect electronics with since that SAE connector normally is used for battery charging, and powering the electric air pump when I need it. So it just makes sense to have a lighter amperage fuse in the Garmin cable.
Want to know more about the Garmin Montana? See the Wisdom and FAQ Thread.
Want to know more about the Garmin VIRB? See here
"The motorcycle, being poorly designed for both flight and marine operation, sustained significant external and internal damage," police noted.