View Single Post
Old 11-15-2012, 11:21 PM   #6299
blakrj
Need to ride
 
Joined: Aug 2009
Location: Cloggland via Borneo, TX, UK, Oz and S.Africa
Oddometer: 187
Quote:
Originally Posted by Mudguts View Post
G'day all I've been servicing ausgofar's bike and the an issue I've found , the top radiator hose rubs on the thermo fan
I've court this in time as it has rubbed about half way through , I can't remember if this has been brought up before, if it has well this is a reminder .

Dave your list so far

3 of 4 valves out of spec It had 2.45 intake set at .14 ext set .12
Fuel filter , air filter oil fiters oil screens
Throttle body, injector and inside cleaned
Re route fuel line
Fix lower tank bush
Fix starter button
Replace bash plate
replace hand grips
Lock wire break pins
Lock wire hand grips
Lock wire oil cap
Retention fork pinch bolts
Remove SAS crap
Replace missing lower chain guide bolt
Modify air box & fix insert nut
And there been a heap of little things to cable tie and clean

Waiting for the vortex cdi ( Monday) , & replacement rocker cover bolt .
Sounds like a few crates of VB are due your way
__________________
2011 KTM 690 Enduro R, 2010 KTM 690 Enduro R (stolen)
2008 Yamaha YZ450, 2002 Yamaha YZ426
www.bruneibikers.com
www.airborneriders.com
blakrj is offline   Reply With Quote