View Single Post
Old 11-20-2012, 07:24 AM   #15021
TerraUnFirma
Fair/Not Balanced
 
TerraUnFirma's Avatar
 
Joined: Jul 2007
Location: North Georgia Mountains...yeah heaven!
Oddometer: 352
Stock Tiger Bar End inserts...

Last night I installed HDB handguards, Top Clamp and mirrors on my XC, but I ended up installing with the stock bar-end bolts and the factory inserts as opposed to tapping and using the supplied HDB inserts and bolts. The stock bolts are a little smaller but are countersunk type and worked fine. It wasn't obvious how the stock inserts might be removed...anyone been through this and have a clue?

Overall, it seems a rock solid setup, highly recommended. I do have one thought, the shields are very flat, vertically, I'm thinking of heating them with a heat gun and seeing if I might not be able to angle the top lip back a bit, I'd think it would cause smoother airflow over hands and lower arms.

Cheers,
__________________
Tom Stites - Dawsonville, GA -
'11 Triumph Tiger 800XC ABS
'97 BMW R1100RT
'06 Suzuki DRz400s
'08 Yamaha WR250R
TerraUnFirma is online now   Reply With Quote