Originally Posted by Dansrc51
Make sure you check the pressure rating on your corney. most are only rated to 35 PSI. that being said, I've gone over that before, but you should know before you take a risk. most likely it will just leak, YMMV
I didn't know that! I thought they were tested to 60.... :eek:
I did a quick search. Wiki says they will hold 130psi. Northern brewer says they are stamped, but most are about 120psi.
Undertake what’s easy as if it were hard, and what’s hard as if it were easy. -Baltasar Gracian
fifthcircle screwed with this post 11-21-2012 at 11:40 AM