View Single Post
Old 12-02-2012, 01:53 PM   #7247
snooker
AttitudeIsEverything
 
snooker's Avatar
 
Joined: Feb 2010
Location: Loveland, Colorado
Oddometer: 1,394
Quote:
Originally Posted by catneck View Post
Looking at attaching an MSR bottle where the cannister now lives. I am guessing it has been done before. If so, a link would be appreciated.
More specifically here is the cannisterectomy.

I tried reusing the stainless straps from the cannister mount with some rubber strips to hold an MSR fuel bottle directly, but they quickly broke from offroad pounding as they are just way too thin. I have been 2 years now on my Tool Tube setup with some simple brackets I made and it has held up fine, better than expected actually. Well worth the money. Also carry a 5' clear plastic siphon tube, you can take off a side panel and store it under the faux gas tank cover above the airbox (along with a 19" spare tube for your tire inside of a Tyvek bag (free from the US Postal Service)).
__________________
Baja 2012 Ride Report ~~~ My 07 BMW G650 XCountry Thread | 03 Honda Shadow ACE 750 | 99 Honda XR400 ~~~

FindMeSpot ~~~ Spotwalla Baja Trip ~~~ Neduro Did Dakar!

snooker screwed with this post 12-02-2012 at 01:59 PM
snooker is offline   Reply With Quote