Originally Posted by Night Crawler
The dimmer works perfect. You can set the level to what ever brightness you want for "low beam" and never mess with the remote again. I ordered the KTM kit so mine came wired with the factory connector, and took about 2 min. to install. The dimmer is pretty bulky, but I managed to install it behind the mask without even using the supplied extensions as I did not like how far the mask sat out from the forks, and looking at that rats nest of wires behind it. Now I just have to figure out a way to get more downward adjustment out of the light as it is pointed too high without the extensions. It should not be that big of a problem, but I might have to Dremel a little more clearance out of the mask so it can tilt down that far. The light is awesome and very high quality. I would recommend buying the dimmer though, so you can run it on a "low beam" when conditions require. Also on full power you might be mistaken for a UFO landing in the forest somewhere!
Great. Thanks forthe input. I spent time cleaning up the rats nest so I have room to spare now, having used the extensions and removed the turn signals.