Quote:
Originally Posted by bkwags
Just bought a 2001 DRZ. Would like to upgrade a few things. Would like a taller handle bar, without re-cableing the whole front end. Also, the coolant overflow tank is busted and needs to be replaced. Also, some of the plastic could use replacing, if not now - eventually.
Any advice on Aftermarket taller bars and holding tank and plastic would be appreciated.
Thanks
BKWags
|
Rocky mountain ATV for plastic.
Factory for overflow bottle. It will just fit better.
Bars, lots of options. Research the different bends in the catalogs. Another option is to add bar risers. Check out Rox Risers. Get the ones with adaptors to accommodate fat bars if you don't want to replace the stock 7/8" bars now, but might sometime in the future.