Ideas on stalling at temp?
This bike runs great as long as temps are down below 3/4. Keep it moving and no issues. But, when it warms up (not to pinned at max) it develops consistent stall and has on one occasion refused to start back up.
Replaced fuel filter 1k miles ago, looked good in there. Pump charging and starts right up when cold. Electrics seem fine, connections checked, tight and greased. 15 minute idle reset done a couple of times.
Thoughts on pinning this down before I start parts replacing?
There is a pleasure in the pathed woods, There is a rapture in the smoking pipe, There is chaos, where none intrudes, in the deep dell, with its thrills roar; I love not nature less, but bikes the more. Byron riding.
All pics < 6/30/12 deleted by Apple
Now with SmugMug supporting ADV