Originally Posted by Yorkshire Pie Eater
Good evening everyone.Newbie seeking advice.I have a 1996 DR200 with a cold weather starting problem.After reading previous posts,i am going to insert a larger pilot jet into the little rascal.My query concerns the air mixture screw at the front of the carb.Does anyone know how many turns from fully screwed in this item needs.All the manual tells me is to screw it out the same number of times it takes to screw it in,which presupposes it was in correct adjustment to start with.Which it might not be.Any advice welcome.Cheers,Mick.
I'm thinking it's ~1 1/4 to 2 turns out... I did a quick search of this thread click here
and see up to 3 turns from some folks. I've got the manual out in the garage - but don't think I'll head out that way just now.
Hope that helps some.