View Single Post
Old 12-30-2012, 04:38 AM   #6449
Emmbeedee's Avatar
Joined: Mar 2008
Location: Near Ottawa, ON, Canada
Oddometer: 9,839
Any Mac/Montana users out there still going through the problem of ejecting the Montana safely after it was connected to your computer?

This helps: JaVaWa Clean Eject

Here's a bit of information from the site:

"Note: some devices (like the Garmin Montana) automatically reconnect after ejecting. You can prevent this by letting CleanEject not to eject the device, but to de-activate it instead. It somewhat the same thing: the volume is closed so that file corruption cannot occur; the difference is that the device will not be switched off.

This can be accomplished by putting a text file with the name unmountme.txt in the root folder of the device. When you have a Garmin Montana it is sufficient to place this file on the SD card only."
Want to know more about the Garmin Montana? See the Wisdom and FAQ Thread.
Want to know more about the Garmin VIRB? See here.
"The motorcycle, being poorly designed for both flight and marine operation, sustained significant external and internal damage," police noted.
Emmbeedee is offline   Reply With Quote