A royal pain in my
that is what it was. I had to rework this piece 4 times due to that air bubble and my novice mistakes. I am going to run mine and let MotoRiley destroy his and see how they hold up before I make any more. It will be 3 months of testing so I figure that will be a good platform to figure out what works and what doesn't.
That and I want to vacuum bag the next one, or come up with a better method to lay it up. I may have to run with many cutouts to eliminate pulling as the resin cured as well as minimize airpockets. I may not use carboard as well, that seemed to add to the problems. I figure if I run 5 sheets and 6-7 in the middle and on the mounting tabs that should be fine and eliminate the need of the cardboard.