View Single Post
Old 01-04-2013, 10:06 AM   #664
kellymac530
motorcycle addict
 
kellymac530's Avatar
 
Joined: Feb 2010
Location: so. cal.
Oddometer: 1,052
Might be hard, even impossible to fit in the limited space on a bike, but maybe something like this:

Additional Photos
Click for full-size image
L & R arrow keys scroll through photos

Standard Manifolds

Race Manifolds

48 IDA Kit with Race Tube Style Linkage

Tube Style Linkage Kit

Weber Dual 48 IDA Kit

Hexbar Linkage Kit

48 IDA


The small heim joints are readily available, mount a small shaft to the head or valve cover area above the carbs and 2 short shafts down to each carb linkage. Run the carbs without any springs on them, then 1 spring on the shaft that now connects them. you could adjust the tension on the spring till it is comfortable and safely closes the carbs...iit could still work with a basic 4 stroke dirt bike style 1 pull cable, 1 return cable throttle housing as a back up.

Just a possiblity....worth a look. If anyone could figure something like this to fit in there..you could.
__________________
it is easier to ask for forgiveness than permission
kellymac530 is offline   Reply With Quote