View Single Post
Old 01-04-2013, 09:42 PM   #3
ciedema
мотоциклист
 
ciedema's Avatar
 
Joined: Oct 2007
Location: On the road! Finally!
Oddometer: 1,937
The parts fiche shows the same part for the 2011 and 2012 990 R.

Once the earlier ones once the spring pins were removed the pin holding the pads in had to knocked out as they have another internal retainer like the one shown in the picture above. It appears the current models are the same.

Only a little force was needed - IIRC I once did it with a small screw driver and a pair of pliers.
__________________
Stories from the Seat Facebook My Photos Cannonball Charity Ride
Personal Attacks - the last refuge of the intellectually impaired.

Quote:
Originally Posted by XR650L_Dave View Post
The only guaranteed route to failure is the attempted solution of problems through the application of ideology.
ciedema is offline   Reply With Quote