I'm not an XT dude, I'm a TW guy but we're saddled with the same crappy 110mm rear brake. I'm doing a 130mm rear brake conversion on a TW200. Don't stone me, but since there doesn't seem to be a TTR thread and a few of you may own both or have converted your XT to a TTR rear drum, I need a pic of a TTR rear brake backing plate.
More specifically I need an edge pic of the swingarm tab slot in the backing plate. Here's the TW:
And here's one from an XT350, which is one of the few that shares the same brake shoe diameter and axle hole size. The bottom of the slot is too far out from the drum. The TTR is a candidate and I'm hoping its slot depth is at least somewhere between the two. If anyone can help me out with this I'd sure appreciate it: