View Single Post
Old 01-07-2013, 06:37 PM   #25
WhicheverAnyWayCan OP
Deaf Biker
 
Joined: Dec 2011
Location: Seven Springs NC
Oddometer: 738
Quote:
Originally Posted by SOLO LOBO View Post
Had to laugh about Marzocchi making the WP's... really doubt that one. Having seen the insides of both up close, the zokes are a distance second to the WP's.

I have a set of the stock springs from my WP 50's that were off of a 640 Adventure (the heaviest KTM that used these), you should measure yours to determine what's in there.... If you want to try the 640 springs, I'll make you a deal.

The WP 50's were fitted to all KTM's in 1999 from 125cc's to the 640's and if yours are off of even the 640 I'd bet the springs are way to light for your use on the Harley.

Here's a bad pix of the 'zokes, very different from what you have there!

That's my thought exactly when I google and did not find a result so fuck it I said..

Thanks very much for pointing it out about the spring on forks.. to tell you the truth I was bit concerned about whether the fork was able to handle the weight and thought about getting a different spring and heavier fork oil? Any thought? I'll have a look at fork spring then let you know. Maybe we will work out a deal.
WhicheverAnyWayCan is offline   Reply With Quote