Originally Posted by mxbundy
Rich, we do not have a low version for your bike. the stock pan is concave underneath and there just isn't enough foam to remove any.
Now if you had an Enduro Engineering seat, we could make you a low one, they have there own pan that is not hollow underneath.
Thanks, as comfortable as your seat is on my DR I will likely just buy and use the EE seat. Too expensive to buy a seat and then a foam and cover kit from you. I shouldn't be sitting on the KTM too much anyway
"Remember that an enduro tests the endurance of three things: your machine, your body, and your wits. Only one has to fail to keep you from reaching the finish line." Cycle World March 1966