View Single Post
Old 01-13-2013, 05:59 PM   #8
col klink
the str8n'r
col klink's Avatar
Joined: Aug 2009
Location: North Ga.
Oddometer: 87
Yep, as stated above all you need is a decent 12pt 10mm socket, and leverage.
It is definitely not an external torx.
Twist on it! They'll pop loose.
1972 R75/5 (col. Klink) That junk's old, but it's str8

2008 KLR685 w/Stage1 porting, Stock exhaust and intake,
GMDATL Alignment Correction (str8n'd the frame)
GMDATL spec/Racetech Goldvalve Emulators,
GMDATL spec/Racetech Shock Goldvalve, remote reservoir, compression adjuster and a 400# spring.
It's str8 now but it wasn't when it was new.
parabellum tall shield
Kent Soignier
col klink is offline   Reply With Quote