Originally Posted by tbenzie
Quick followup - I just got off the phone with Sena inquiring about the mixing of the headset intercom audio and the audio stream from a multipoint paired SR10. The tech indicated it was not possible on the SMH10. I referred him to the various reports of that ability. He then changed his response to "We do not claim this ability". Sounded like this was the first they heard of it and, if it is indeed possible, it was unintentional.
That's interesting since the manual of the SMH10 specifically mentions this ability to mix in the SR10 audio while on intercom. Did you tell him their manual states it does?
I should go back and check my SMH10 with the SR10 and see if the audio mixes, but I'm pretty certain it does.
Section 6.4 of the SMH10 v4.0 manual ater step 5.
5. If the pairing process is not completed within three minutes, the
SMH10 will return to stand-by mode.
The incoming audio from the two-way radio via SR10 is heard in
the background while having an intercom conversation or a mobile
phone call. You can listen to music, answer a mobile call, have an
intercom conversation and use a two-way radio via SR10 for group
communication as shown in the figure below. A GPS navigation or
a radar detector could be connected to the SR10 by wire. The GPS
voice instruction or the radar detector alarm is also heard in the
background via SR10 while having an intercom conversation or a
phone call. Please refer to the SR10 user's guide for details.