View Single Post
Old 01-17-2013, 02:02 AM   #6901
LukasM
Beastly Adventurer
 
Joined: Nov 2006
Location: On a RTW ride - currently Central Asia
Oddometer: 5,334
Quote:
Originally Posted by The Letter J View Post
I haven't found any other commercially available cam's for the 690 yet but I haven't looked terribly hard either.
Here you go, their stuff is normally very good quality as they only work with top manufacturers like CP etc.

http://www.gw-racing-parts.de/index2...is=2010&lan=en

Tuningkits

KTM 690 (2006-2010)

Product-Nr. Product Description Picture Retail €
(without tax)
KTM690/06-09/ST1Tuning-Kit 1Tuningkit KTM690 stage 1. New Camshaft Stage 2. CP forged pistonkit of the extra class 102 mm. Compression 11,8 : 1. Delivery including the suitable piston rings, wrist pins and wire locks. Inclusive cylinder honing with diamond honing stones. Cylinder honing is necessary concerning the correct running clearance and the surface roughness adequately to the piston ring.536,43
KTM690/06-09/ST2Tuning-Kit 2Tuningkit KTM690 stage 2. New Camshaft Stage 2. CP forged pistonkit of the extra class 102 mm. Compression 11,8 : 1. Delivery including the suitable piston rings, wrist pins and wire locks. Inclusive cylinder honing with diamond honing stones. Cylinder honing is necessary concerning the correct running clearance and the surface roughness adequately to the piston ring. Cylinder head porting inclusive radius valve seat cutting. Inclusive shot peen of the combustion chamber and channels.665,71
KTM690/06-09/ST3Tuning-Kit 3Tuningkit KTM690 stage 3. New Camshaft Stage 2. CP forged pistonkit of the extra class 102 mm. Compression 11,8 : 1. Delivery including the suitable piston rings, wrist pins and wire locks. Inclusive cylinder honing with diamond honing stones. Cylinder honing is necessary concerning the correct running clearance and the surface roughness adequately to the piston ring. Cylinder head porting inclusive radius valve seat cutting. Inclusive shot peen of the combustion chamber and channels. Including crankshaft balancing.789,86
KTM690/06-09/ST4Tuning-Kit 4KTM 690 bigbore - tuningkit. New camshaft stage 2. Cylinder boring for 104 mm and new LFC plating. CP forged pistonkit of the extra class 104,00 mm, + 2 mm oversize, compression 12,5 : 1. Delivery including the suitable piston rings, wrist pins and wire locks.Cylinder head porting inclusive radius valve seat cutting. Inclusive shot peen of the combustion chamber and channels. Including crankshaft balancing.1090,47
NKTM690/06-10/ST2 CamshaftNew camshaft stage 2! More top end power ! Very good for bigbore engines.292,86
PCPKTM690/06-09/102mPistonCP pistonkit of the extra class 102,03 mm. Compression 11,8:1. The cylinder must be honed with diamond honing stones. Cylinder honing is necessary due to the fact that the piston especially for the overhaul has a slightly oversize of 0,03 mm.220,00
PCPKTM690/06-09/104mPistonCP - Forged Pistonkit of the extra class 104,00 mm, + 2 mm oversize, compression: 12,5 : 1,. Delivery including the suitable piston - rings, wrist pins and wire locks. The cylinder must be bored for oversize and new coated. 220,00
KTM690-HSC3Piston coatingHSC3 piston coating
40,86
LukasM is offline   Reply With Quote