Thread: fork fail....
View Single Post
Old 01-18-2013, 08:52 PM   #2
whisperquiet
Studly Adventurer
 
whisperquiet's Avatar
 
Joined: Aug 2007
Location: 62298 in lovely corrupt/bankrupt Southern Illinois
Oddometer: 901
The fork cap threads on to the damper cartridge if like most forks. Usually, about 12mm of the damper rod is threaded into the top fork cap.....don't thread too much into the cap. Also, some upside down forks have a small diameter internal hollow tube that runs the length of the damper tube from the fork cap rebound adjuster to the bottom of the fork.
whisperquiet is offline   Reply With Quote