Thread: fork fail....
View Single Post
Old 01-19-2013, 10:22 AM   #5
fast4d
Beastly Adventurer
 
Joined: Jul 2007
Location: Los Angeles, CA
Oddometer: 2,236
Quote:
Originally Posted by whisperquiet View Post
The fork cap threads on to the damper cartridge if like most forks. Usually, about 12mm of the damper rod is threaded into the top fork cap.....don't thread too much into the cap. Also, some upside down forks have a small diameter internal hollow tube that runs the length of the damper tube from the fork cap rebound adjuster to the bottom of the fork.

yes. I found this out on my learning curve.
__________________
Alan
2011 KTM RC8R
2012 BMW S1000RR
2000 Kawasaki ZRX1100
2013 KTM SMT 990
fast4d is offline   Reply With Quote