Quote:
Originally Posted by Daamud
Double check the bottom bolts on that skid plate. Some are a little long, and come VERY close to the engine case. A good hit might bend and or push the bolt into the case.
|
Thanks, will do. The plate came with allen head bolt, which I do not care for in impact areas. One nick and I'll never get the wrench in there, so I'll be switching to some stainless hex or torx.
Quote:
Originally Posted by japako
Nice job on the bike. I really like the rack.
|
Thanks. I wanted to have something that wasn't too big, yet large enough to strap a duffel bag on. If anyone wants to, I can trace the rack and send you a template.
I'm still thinking about cutting a few holes in it, but I'm waiting to see if I'll end up with a Rotopax first. If I do, the holes will be done after attaching the mount.