View Single Post
Old 01-21-2013, 08:57 AM   #1340
ConTeacher
DirtBikeStuff.net
 
ConTeacher's Avatar
 
Joined: Feb 2007
Location: High Desert, CA
Oddometer: 221
Thumb The Raffle Keeps Getting Bigger!

A Dual Tool Plus kit consisting of a Promach Dual Tool and a Tamper Resistant Oil Cap.







If you ride a BMW R1200 this new tool will lighten your load and make it more compact. Made of anodized, CNC machined, 6061-T6 aluminum, the Promach DualTool is 1 1/4 inches in diameter by 1 1/2 inches long and weighs in at only 1.8 oz. The outside tool is for spark plug cap removal, and if you can't get a good enough grip on it, just insert a screwdriver through the hole and you've got a T-handle. This tool can be used on the BMW Oilhead and Hexhead models, from 2003-2012. The hex tool is designed to fit your front axle for wheel removal. It has a 22mm hex that will fit the R1200, K1200S, K1200R, and K1200GT front axles, and has a 19mm hex on the other end for socket or wrench use. You can also help out a friend with an F800 BMW since the 19mm hex will fit that bike. It has a 3/8 inch square drive on each end, designed to fit your ratchet or torque wrench.


.
__________________
All that is required for evil to prevail is for good men to do nothing. ~ Edmund Burke

http://ConTeacher.whereamiriding.com

ConTeacher screwed with this post 02-07-2013 at 06:05 PM Reason: At request of vendor
ConTeacher is offline   Reply With Quote