ADVrider - View Single Post

HellSickle · 01-21-2013, 09:45 AM

I need help on the power valve adjustment for a 2011 300 XC-W.

I have a service manual for a 2006 that calls out a spec for the power valve height. If you search the manual, it's called "Adjusting the control flap (dimension "Z"). The 2011 motor is very similar, so the procedures are the same, but I suspect the Z dimension might be different.

Can anyone with a current service manual let me know what is called out?

Thanks in Advance.

01-21-2013, 09:45 AM	#786
HellSickle Scone Rider Joined: Sep 2005 Location: Fort Collins Oddometer: 6,699	Power valve adjustment - Need dimension for 2011 I need help on the power valve adjustment for a 2011 300 XC-W. I have a service manual for a 2006 that calls out a spec for the power valve height. If you search the manual, it's called "Adjusting the control flap (dimension "Z"). The 2011 motor is very similar, so the procedures are the same, but I suspect the Z dimension might be different. Can anyone with a current service manual let me know what is called out? Thanks in Advance. __________________ We don't stop riding because we get old, we get old because we stop riding.