|
If the outlets are 1" and the inlet is 2" as he stated, then the area of the openings are exactly the same...
1" outlet = 0.5" radius, squared= 0.25 x 3.1415 {Pi rounded off} = 0.785375
2" inlet = 1" radius, squared= 1 x 3.1415 = 0.785375......
He might well be just fine....there is however the length of the tubing on the in and out lets...that could disturb air flow some...play with it.
__________________
it is easier to ask for forgiveness than permission
|