Thread: fork fail....
View Single Post
Old 01-28-2013, 01:24 AM   #8
stainlesscycle
Beastly Adventurer
 
stainlesscycle's Avatar
 
Joined: Jun 2008
Location: morgantown, wv
Oddometer: 2,086
Quote:
Originally Posted by MCCOYBOY View Post
Remove the caps from the cartridge rod, screw the rebound adjusters all the way in, reinstall the caps.
i don't know this fork, but i would do the opposite. make sure the rod is fully seated, all the way in - sometimes they appear fully down, but they're not..... . put the top clickers all the way out, then reinstall.

if you turn the rebound adjusters all the way in, they won't be able to screw into the rod when after you install the caps..... and you'll destroy the taper/threads on the adjusters...
__________________
current bikes
07 gasgas xc300-94 duc 900ss-86 morini camel (2)-84 IT200-83 IT175-78 guzzi lm1-77 pursang 250-76 morini 3 1/2 strada-76 frankentaco pursang 200-74 frankentaco pursang 200-74 morini 3 1/2 sport-74 mz ts250/0-74 puch 175 (3)-73 can-am 175tnt-71 guzzi frankeneldo-71 ossa Stiletto-70 frankentaco sherpa s(2)-66 morini corsarino(2)-63 morini corsaro + many more
stainlesscycle is offline   Reply With Quote