View Single Post
Old 01-28-2013, 10:20 AM   #105
mcma111
Beastly Adventurer
 
mcma111's Avatar
 
Joined: Jul 2007
Location: San Francisco,Ca.
Oddometer: 10,647
When I installed the USD forks on my XR600 I dry fit the forks and tank to check how the stops would work. The forks were hitting the larger Clarke tank so I welded some stops on the frame and ground them down so the forks would stop just before hitting the tank. Look at the bottom, side of the head tube below the wiring harness loop and you'll see the block I welded on.



The other side,

__________________
Steve in SF

BMW's
58 R26
79 R100s
91 R100gs

87 Harley FXRS-SP ~ 06 KTM 625 SMC ~ 72 Honda CB750/915cc ~ 92 XR600/654cc ~ 95 XR650l/675cc ~ 03 CRF450r ~ 05 CRF450x ~ 02 XR650l/675cc ~ 86 YZ490 ~ 93 YZ80 ~ 93 XR650l Project
mcma111 is offline   Reply With Quote