View Single Post
Old 01-29-2013, 04:29 PM   #28432
tkitna
Beastly Adventurer
 
tkitna's Avatar
 
Joined: Nov 2007
Location: West Virginia
Oddometer: 3,929
Quote:
Originally Posted by ttpete View Post
Do a detail strip and clean it thoroughly using cotton swabs and an old toothbrush with some solvent. I like acetone or lacquer thinner. Take the magazines apart and wash them out, then check for bent feed lips. Get the bore and chamber squeaky clean with a wire bore brush. Inspect for problems, then reassemble, lubing as you go. And try some different ammo.

If you still have the little stock grips on the 642, I wouldn't blame her for not liking it. Try some bigger rubber ones, maybe Pachmayrs. There's also nothing wrong with using .38 Special wadcutter target loads. They will reduce felt recoil and still be effective.
I've cleaned this Sig down to the nitty gritty couple of times, but i'll do it again.

Yeah, its stone stock, but she hates it. We did run the .38+p's through it, but its in her head now. She needs something less then that.
__________________
Donovan: If he (Paul McCartney) fell on the piano, by the time he picked himself up he would have written three songs.

2008 DL650
2013 Goldwing
tkitna is offline   Reply With Quote