View Single Post
Old 01-31-2013, 03:38 AM   #1971
gets stuck in sand
Vicks's Avatar
Joined: Oct 2006
Location: Abu Dhabi, UAE
Oddometer: 3,204
Originally Posted by Supahflid View Post
Why can't I keep the SAS turned off? Under the map edit tab I can right click and disable the SAI, then I do a fifteen minute idle, but it won't stop throwing the error code.

Also, under the Test and Adjust tab, why doesn't clicking any of the items on the left hand side do anything?
Originally Posted by Zuber View Post
When you modify the map in the computer, like turning the SAI off, you must write the map to the ECU on the bike, then do the 15 minute idle.

If the Test and Adjust is dim or off, check that you are connected to the bike's ECU. You should see a green light in the lower RH corner of the computer screen.
+1 on Zuber.

You need to download the map into the ECU. Simply un-checking the box will not achieve the results.

The test and adjust functions (the ones that are dark grey) need a "double click" in my experience (you need to be connected to the ECU, obviously). The light grey ones are prohibited/not allowed.
2007 KTM Adv990S - Sold, 2010 KTM530Exc-Rally and 2012 KTM Adv990
530Exc Adventurization re-build
Vicks is online now   Reply With Quote