Show us your TransAlp modifications!
View Single Post
01-31-2013, 08:00 AM
BIG ENDURO FREAK
Joined: Jul 2011
Location: Serbia, Novi Sad
Just take look again at this junk design...
I decided to mod it and to make it much more reliable, but not to weld it to a frame. The previous design was to hang on bolt that was attached trough radiator... very bad and vary sad solution, the fell could tear it trough. So I made a piece that attaches to frame. It was made from 11 mm thick ship steel.
And completely modified the crash bars so they are wider.. far from side fairing
Also made it more harder with another parallel pipe in place
Crash bars (roll bars), painted and ready to roll
And, everything put togeather again
But, the windscreen was still missing
And finaly, after few months... a new very well made windshield
Iron_Floyd screwed with this post 01-31-2013 at
View Public Profile
Find More Posts by Iron_Floyd