Originally Posted by LC Garage
2a thru 2d. We have propane, I ran the stove top to verify. I have manipulated the valve at the furnace from an inward position to an outward position (rotated counterclockwise) and am ASS-uming there is propane present. there is no evidence (sight or sound) of the igniter trying to light.
I am confused.
Can you light the stove manually? If that 's the gas then the igniter isn't working.
Not sure there is gas at the stove because it won't light? There is probably a gas detector and a 12 volt valve on the tank. Make sure the detector is on. Cycle it off and on. Most of my problems have been that gas detector and the circuit to the shutoff valve.
Sent from my iPad using Tapatalk HD