View Single Post
Old 02-03-2013, 01:41 AM   #109
Old Kiwi#99
Gnarly Adventurer
Joined: Nov 2006
Location: Middle Earth, New Zealand
Oddometer: 291
Originally Posted by Old Kiwi#99 View Post
Nice writeup,
If I understand the oil supply to the top end, it is pressure fed to the left side cam bearings, but splash fed to the right side ones. .
Quoting myself - thats not correct. Pulled the cams to do the clearances to day and found the cams are hollow, with passages where the bearings are.(and plugs in the ends) Pressurised oil gets to the left side caps, passes into the centre of the cams then back out the holes at the right side caps. The right exhaust is still the last place to get oil, though.
Old Kiwi#99 is offline   Reply With Quote