View Single Post
Old 02-05-2013, 07:04 PM   #3
Joetool
Gnarly Adventurer
 
Joined: Oct 2012
Location: Above Boulder, near Ned
Oddometer: 151
First, you need to double up the end 2x's and have them go down into the floor. Also, you can skin one side with 1/2 inch plywood an cut it into the full height wall some. Screww it every 6 inches and you wil create sort of a box beam. Also; stagger some 3.5 inch screws in the bottom plate.And, you need WAY more screws in your drywall; 6" on the edges and 12" in the field...
Joetool is offline   Reply With Quote