Thread: Buell S3T?
View Single Post
Old 02-11-2013, 12:53 AM   #49
EmptiMind OP
Stoopid Youngin'
 
EmptiMind's Avatar
 
Joined: Apr 2011
Location: PNW
Oddometer: 458
Quote:
Originally Posted by Donkey Hotey View Post
There were two generations of Showa shock: the earlier 16.5" and the later 14". They had some failures on the 16.5" shocks and they came up with a safety containment loop thingy that clamped around the shock in case the shock eye failed. They were butt ugly. I would imagine that bike got it and somebody removed it.

When they ran out of 16.5" shocks, they started installing the 14" shocks from the factory and any remaining bikes got it for the 'recall'. Plenty of aftermarket replacements are available in both lengths.

The 16.5" Showa is rumored to be at risk for the eye breaking (hence, the steel safety loop added later). From posts on Badweb, nobody ever ACTUALLY had one fail but, the margin is questionable. I would probably start looking for an aftermarket or at least the 14" replacement Showa. Even if that shock were perfect, it will leak sooner or later.
So any aftermarket that's the right length should fit? Any suggestions, anyone?
__________________
Just a fool on a Buell.
EmptiMind is online now   Reply With Quote