Thread: Go Sportsters
View Single Post
Old 02-14-2013, 12:16 PM   #2178
tree88's Avatar
Joined: Feb 2013
Location: Killeen TX
Oddometer: 52
Cool2 as promised-

belt to bellcrank clearance

closeup of above

belt to pulley cover clearance

holes that must be slotted (and half the thickness of the bottom spacer put behind ie: 1/4" in down will require 1/8" of spacers to get the bolts to tighten correctly)

you can just make out the 1/8" of washers behind the bracket.
tree88 is offline   Reply With Quote