View Single Post
Old 02-21-2013, 07:26 AM   #273
kbuckey
Studly Adventurer
 
Joined: Dec 2005
Location: Lookout Mountain - above Golden, CO
Oddometer: 736
Quote:
Originally Posted by Bobby Ginger View Post
I am almost ready to pull the trigger, but need some info. I will be installing on a DRZ 400. From what I have seen the electrical is PnP. So if I do not purchase the dimmer, will I be able to switch low and high beam or do I have to have the dimmer module to do that? And if that is the case does it work on the factory switch? Thanks!
On mine I have the bottom light set for low beam at about 50% of max (and it's about as good as the stock light on hi-beam!), and, with my factory switch, I can then go to full on on both lights, which is incredible. I also run a pair of Solstice 10s aimed pretty wide so that on low beam I still have the sides of the road covered for the pesky critters that are out there. I also have both the fairing lights and the Solstice lights on their own switches so I can turn them off for starting or when I'm running the heated grips and the heated jacket. I really, finally, feel I have adequate - great, actually - lights on my DR650.
kbuckey is offline   Reply With Quote