Originally Posted by m2h
Hi. Im in the process of a rebuild on my '86 and have purchased a Wiseco 101 11:1 kit. With the higher compression i was wondering about the need to look at jetting to get the most out of it.
I live at sea level, temperature range about 5 - 30 deg C. The jetting I have is 108, 65 main carb and 105 in the other.
Any advise would be appreciated so I can do it while the beast is in bits!
I live near sea level too, but have much larger jets in my 87 XL. 125 primary carb, 118 secondary.
Bigger bore usually doesn't need drastically different jets, but yours sounds too lean to start with from my experiences.