View Single Post
Old 02-23-2013, 10:41 PM   #46
drtdino OP
drtdino's Avatar
Joined: Jan 2013
Oddometer: 24
I used 3/8 16 all thread, which is the same thread on the nuts that come with the trailer. And I used 1/2 tubing cut to fit as the spacer. I welded them to the frame slipped on the fender and now each fender is bolted down with four bolts, all spread out.

drtdino screwed with this post 02-23-2013 at 10:52 PM
drtdino is offline   Reply With Quote