And so the quest for rear end travel begins!
A few basic measurements
got me here
Hmmm, not much to work with!
Gonna need a longer swingarm for a start!
No turning back!!
I m,easured afew other bikes and settled on a axle to axle length of 500 mm
Found a bit of 75mm x10 mm flat bar, lopped of a couple of bits, some rough and ready jigs
and I had this
k in the bike for some checking, all square, chain alignment spot on!
Tried every position I could
but all I'm ever going to get with that little shock stroke is 6and a half inches of wheel travel,so the hunt is on for longer shocks!