What I am trying to figure out is whether the computer mount puts the whole thing above the headlight mask, or if it has to be bent around it.
I really like Paul' stuff, but I may end up going back to a Scott's or BRP damper mount and Fastway style inner mounts for the HDB bars.
Originally Posted by Crawdaddy
I simply purchased the stock computer protector and moved everything up top.....no turn signal indictors on the XCF-W......just FI, Low Gas, and headlight pull switch........be careful with the small "press fit" FI/low gas idiot indicator tubes.....the plastic/amber lenses on top of the white plastic tubes break easily......ask me how I know
....cost me ~$30 to replace the FI indictor tube/amber lens cover.......which probably cost KTM ~$3.00
The push button switch runs my heated grips.......the Powerlet is there to charge my phone and/or anything else I want to power off a SAE pigtail (camera, battery tender, heated clothing, etc.)......the GPS/powerlet are direct wired to the battery....the heated grips are "switched" so they only run when the bike is running.....I have another switched lead that I'm not using at the moment.....
I bought my electrical harness here: http:www.easternbeaver.com/Main/Wiring_Kits/Fuseboxes/3_Circuit/3_circuit.html//