View Single Post
Old 03-18-2013, 11:29 PM   #8
Te Hopo OP
AKA Deanohit
Te Hopo's Avatar
Joined: Sep 2007
Location: Either Picton or Kokatahi, New Zealand
Oddometer: 1,627
I don't know why the rear brake rod on an offroad bike such as this runs down the bottom of the swing arm but after a few off road trips it was bent and battered and something needed to be done:

I found on another forum where they had just switched the brake lever arm up the other way and ran the brake rod straight over the top:

A slight bend to clear the swing arm is the only other mod needed, the brake still works perfectly like this:

Te Hopo screwed with this post 03-20-2013 at 01:07 AM
Te Hopo is offline   Reply With Quote