View Single Post
Old 03-22-2013, 03:51 PM   #21
laramie LC4
crash test dummy!
 
laramie LC4's Avatar
 
Joined: Sep 2004
Location: Tucson, Az
Oddometer: 2,344
Quote:
Originally Posted by mcmann View Post
I transferred the rubber grommets from the OEM bash guard and installed the flat washers on the outside of the rubber grommet:

that is what i did. be careful threading those front bolts. i had to grind away some of the bracket that it bolts too because the welds on the plate were too thick. if you tried to thread it when everything was tight, it would try and cross-thread really easy. you had to loosen both lower tank bolts, and crash guards to loosen everyhting up. now with the slight grinding, it will line up just fine tight.

laramie
__________________
DON'T TRUST CUT 7! HE IS A CROOK! ASK ME HOW I KNOW.

'12 LC8 990R, '02 LC4 640, '05 WR 450f (part-out), '98 XR400R, '76 KE100, '05 525 (Step-Child)
laramie LC4 is offline   Reply With Quote