Hi everyone! This is my first post so I thought I would start by jumping in head first. I just purchased my first restoration project ever...a 1965 Honda CB160. It's a basket case and I've got my work cutout for me. It currently does not run so it looks like I'll be dropping the motor out of it right away. I see a lot of you have taken your bikes and really done some exceptional work so I'll be looking for advice from many of you frequently....might even overstay my welcome. Without further interruption here's my newest addition and challenge.
I started to take things off/strip it down to the frame. I'm quitting for tonight until I pick up a Clymer Service manual tomorrow. Goodnight all!!!