Originally Posted by RememberTheFallen
Can you elaborate on the "joining tube"? My parts store didn't have anything in brass but I found a plastic fitting. Figured it would work since it is a vent line and shouldn't see liquid fuel very often. Just confused why you need a joining tube.
I used a small piece of the vent line supplied originally and then replaced all of the line about six months later with higher quality clear tubing that doesn't react to fuel, also bought from a car parts store. I did have to cut up to the first barb off of the right angle piece as it faces vertically towards the fuel tank just to ensure better clearance with the seat base.
The very existence of flamethrowers proves that sometime, somewhere, someone said to themselves, “You know, I want to set those people over there on fire, but I’m just not close enough to get the job done.”