View Single Post
Old 07-23-2013, 12:09 PM   #33
snooker
AttitudeIsEverything
 
snooker's Avatar
 
Joined: Feb 2010
Location: Loveland, Colorado
Oddometer: 1,394
Quote:
Originally Posted by ChuBrocka View Post
I'm hoping someone can help me out here. I'm attempting bluecrab's mod. I bought a Mode Electronics jack (part 24-391-1):
My problem is that I have no idea how to wire the jack and I can't find any diagrams online. Anyone familiar with these?
Here I'll google it for you .

http://www.mode-elec.com/pdf/audio/24-391.pdf

You'd have to probably get an ohm meter and take a plug and cut and strip the wires, then do some plugging in and measuring.

This switch has 2 sets of contacts, as described in the following pdf as having "2 normally closed switches", kinda like a double throw switch in a way. It looks like the Sena output would go to pins 2 and 5, and normally 2 & 5 are connected to pins 3 & 4 (helmet speakers?). Then when you plug in your earbuds it connects pins 2 & 5 to the earbud wires. You have to figure out polarity which is which.

http://www.mode-elec.com/Products/au...2814-18%29.pdf

Are you trying to hook up something that normally connects to speakers in the helmet but when you plug in the earbud male end it then connects only to the earbuds???

If not then maybe the part 24-392-1 looks much simpler. No normally closed connections, more like a single throw switch concept.

http://www.mode-elec.com/pdf/audio/24-392.pdf
__________________
Baja 2012 Ride Report ~~~ My 07 BMW G650 XCountry Thread | 03 Honda Shadow ACE 750 | 99 Honda XR400 ~~~

FindMeSpot ~~~ Spotwalla Baja Trip ~~~ Neduro Did Dakar!
snooker is offline   Reply With Quote