View Single Post
Old 10-15-2013, 07:20 PM   #25789
MADSTROM
Beastly Adventurer
 
MADSTROM's Avatar
 
Joined: May 2006
Location: Powhatan, Va
Oddometer: 1,434
Quote:
Originally Posted by skychs View Post
Help.....
I have a new TKC knobbie tire from Jake Wilson. I have a used "new to me" spoked wheel from someone on ADV. The tire and wheel have been balanced twice. One of the two are out of round. Nothing visible on the wheel.

I need advise on how to determine the problem.

I have a brand new Anakee 3. I can take the TKC off the spoked wheel and try the Anakee. If the vibration goes away its the TKC. Any other advise?

Anyone know of someone local who can "true" a spoke wheel if that's the issue?
Pull the axel run it through the wheel and set on a pair of jack stands. Check the radial run out with a straight edge against the tire tread. If the tire is out of round you will have a high spot somewhere.

Then rotate the straight edge 90 degrees against the side wall and check trueness of the rim. If you have wobble there you will need to true the wheel by re-tensioning the spokes. If thoses are Woody's wheels they should come to you already trued.
MADSTROM is offline   Reply With Quote