View Single Post
Old 10-27-2013, 02:26 PM   #11059
EJ_92606
Rider
 
EJ_92606's Avatar
 
Joined: Aug 2007
Oddometer: 1,779
Quote:
Originally Posted by TowPro View Post
I asked my salesmen if it had ride height sensors so the bike is level depending on how much load, and he said no.
here is why I asked:
Manual, page 65.
Dynamic EAS Electronic Suspension Adjustment
- with dynamic ESA

Adjustment Options
Using the electronic suspension adjustment, dynamic ESA you can conveniently adjust your motorcycle to the load.
Using leveling sensors, dynamic ESA detects movements of the running gear and responds to them by adjusting the damper valves.
(this says Damper Valves, not Spring rate)

Now on page 67, under section about Adjusting Chassis (that starts on page 66).
At very low temperatures, unload the motorcycles before increasing the spring preload, and have the passenger dismount if necessary.
This makes me think there is no ride height sensors, and it sounds more like a "pre set" spring load change.
So are you agreeing with me or are you still not understanding what it means
__________________
'13 R1200 GSW
EJ_92606 is offline   Reply With Quote