View Single Post
Old 02-17-2014, 11:21 AM   #40352
henrymartin
Mr. Tourguide
 
henrymartin's Avatar
 
Joined: Sep 2010
Location: South of the Great North Woods
Oddometer: 3,421
Quote:
Originally Posted by AdvNener View Post
Thanks for the detailed report !

One question, once there:


If I were just going to change fork oil... could i just stop here and jump to:



My bike sees very few dust, no sand or mud, so i guess i should change oil someday but that's all...
I think that would work. Just unscrew the cap, remove the spring and the little rod inside the damper, turn it upside down, pump it a few times, and when all the fluid has drained out, move on to the filling part. Nice and easy.

Just make sure the oil reaches the top of the inner tube. Otherwise you will get false reading level. It's always better to remove excess than not have enough.

There are small holes in the inner tube that let the oil seep between the inner/outer tubes.
henrymartin is offline   Reply With Quote