View Single Post
Old 12-22-2008, 04:31 PM   #196
tomatoe333
Beastly Adventurer
 
tomatoe333's Avatar
 
Joined: Sep 2007
Location: Back on the east side
Oddometer: 2,240
Quote:
Originally Posted by Pedro Navaja
Bummer, so the Sherpa has this plug also. My issue with having the pilot screw accessible is for altitude settings.
One thing I've been meaning to look into.

You can get a mixture thumbscrew from a couple of sources that will fit the Mikuni BST carb on a KTM 640 Adventure. I've been meaning to see if it'll fit the Mikuni BST carb on the Sherpa.

There isn't a huge amount of space to get to the mixture screw on the Sherpa, but you can loosen the carb boots and tip the carb sideways slightly to get to it. Easier to understand when you're actually looking at the bike than to describe it.
tomatoe333 is offline   Reply With Quote